Convert your Westinghouse 28000 watt Generator to Propane & Natural Gas

Table of Contents

1. Introduction
2. Mounting the Regulator
3. Removing the Gasoline Tank
4. Accessing the Air Cleaner
5. Installing the Adapter
6. Mounting the Gas Tank
7. Hooking Up the Hose to the Regulator
8. Hooking Up Propane
9. Hooking Up Natural Gas
10. Conclusion

Introduction

In this article, we will be discussing how to convert a Westinghouse generator to use natural gas or propane as an alternative fuel. We will provide step-by-step instructions on mounting the regulator, removing the gasoline tank, accessing the air cleaner, installing the adapter, mounting the gas tank, and hooking up the hoses. Whether you prefer propane or natural gas, we have you covered. So let's get started on this exciting project and ensure your generator is ready for any power needs.

Mounting the Regulator

The first step in converting your Westinghouse generator is to mount the regulator. We will provide a custom kit that is pre-assembled for your convenience. No need to worry about putting things together. Simply follow these instructions to mount the regulator without drilling into the frame:

1. Loosen the two eight-millimeter bolts located on the front and back sides of the generator.
2. Remove the bolts completely and set them aside.
3. Utilize the existing bolts to mount the regulator bracket securely.
4. Tighten the bolts to ensure a proper fit.

Mounting the regulator is a quick and straightforward process with our custom kit. It eliminates the hassle of figuring out where to mount the components and provides a seamless installation experience.

Removing the Gasoline Tank

Next, we need to remove the gasoline tank to prepare for the conversion. Follow these steps to safely remove the tank:

1. Locate and remove the gas line connected to the tank.
2. Disconnect the vent hose from the tank.
3. Remove the four eight-millimeter bolts securing the tank to the generator.
4. Lift the tank off and set it aside.

If your generator contains any residual gasoline, ensure you drain it before proceeding. With the tank removed, we can now move on to accessing the air cleaner.

Accessing the Air Cleaner

With the gasoline tank out of the way, we can easily access the air cleaner. Follow these simple steps:

1. Unclip the fasteners holding the air cleaner.
2. Remove the air cleaner and set it aside.

This step allows us to reach the adapter, a crucial component in the conversion process. Let's move on to the next step and install the adapter smoothly.

Installing the Adapter

Installing the adapter is a breeze with our custom kit. We have pre-assembled the necessary components, including all clamps required for a proper fit. Follow these steps to install the adapter:

1. Locate the adapter and tuck it into the designated area.
2. Slide the adapter onto the appropriate connection point.
3. Ensure a secure fit by aligning the holes properly.
4. Use the new hardware provided to fasten the adapter in place.
5. Double-check that everything is tightened, but avoid over-tightening.

The adapter enables the use of alternative fuels and streamlines the entire conversion process. Let's now move on to mounting the gas tank.

Mounting the Gas Tank

Now that we have installed the adapter, let's mount the gas tank back onto the generator. Follow these steps:

1. Slide the gas hose onto the bottom of the tank.
2. Secure the hose in place using a clamp.
3. Align the holes on the gas tank with the corresponding openings on the generator.
4. Mount the tank securely using the provided hardware.
5. Double-check that all connections are secure.

Ensure that the breather hose is also connected correctly. With the gas tank mounted, we can now move on to hooking up the hose to the regulator.

Hooking Up the Hose to the Regulator

Finally, it's time to connect the hose to the regulator. Follow these steps:

1. Slide the hose onto the adapter connected to the generator.
2. Use a hose clamp to secure the connection.
3. Ensure a tight fit but avoid over-tightening the clamp.

With the hose securely connected, you are ready to hook up propane or natural gas. Let's cover both options.

Hooking Up Propane

When using propane, you have the option of utilizing quick-connects or screw-on connections. Follow these steps to hook up propane:

1. Connect the propane hose to the appropriate connection point.
2. Use a wrench to tighten the connections securely.

Ensure you have a sufficient propane supply, as larger generators may require a hundred-pound tank for extended use. Smaller tanks can be used in emergencies but may freeze up after an hour of use, resulting in a loss of power.

Hooking Up Natural Gas

If you prefer using natural gas, we provide a hose with a male end for attachment to the generator and another end for connection to your gas meter. Follow these steps to hook up natural gas:

1. Attach the hose with the male end to the adapter.
2. Connect the other end of the hose to your gas meter.

Ensure all connections are secure, and double-check that the installation matches the previous steps. Congratulations! Your Westinghouse generator is now ready to run on natural gas.

Conclusion

Converting your Westinghouse generator to use natural gas or propane is a straightforward process that enhances versatility and reduces reliance on a single fuel source. Our custom kits ensure a hassle-free installation experience, complete with pre-assembled components. Whether you choose propane or natural gas, our guide has provided you with step-by-step instructions to successfully convert your generator. So go ahead, enjoy the benefits of alternative fuel sources, and keep the power running in any situation.

Highlights

• Easily convert your Westinghouse generator to run on natural gas or propane.
• Custom kit includes pre-assembled components for a hassle-free installation.
• Mount the regulator without the need for drilling or additional modifications.
• Follow step-by-step instructions to remove the gasoline tank and access the air cleaner.
• Install the adapter and securely mount the gas tank using provided hardware.
• Connect the hose to the regulator, whether using propane or natural gas.
• Hook up propane with quick-connects or screw-on connections.
• Utilize a hose with a male end for natural gas connection to the generator and gas meter.
• Enjoy the versatility and reliability of alternative fuel sources for your generator.
• Keep your Westinghouse generator running smoothly in any situation.

FAQ

Q: Can I convert any Westinghouse generator to run on natural gas or propane? A: The ability to convert your generator depends on its model and specifications. It is recommended to check the compatibility of your specific generator with a conversion kit.

Q: Do I need any specialized tools to perform the conversion? A: The conversion process does not require any specialized tools. Basic hand tools should be sufficient to complete the installation.

Q: How long does the conversion process typically take? A: The conversion process can typically be completed in a few hours, depending on the individual's level of experience and familiarity with the generator.

Q: Are there any maintenance requirements for a generator running on natural gas or propane? A: Similar maintenance principles apply to generators running on alternative fuels. Regular maintenance, including cleaning, oil changes, and filter replacements, should be conducted as recommended by the manufacturer.

Q: Can I switch between natural gas and propane after the conversion? A: Yes, once the generator has been converted, you can switch between natural gas and propane by disconnecting and reconnecting the appropriate hose and ensuring the correct fuel source is available.

Q: Can I still use gasoline as a fuel option after the conversion? A: It is not recommended to use gasoline as a fuel option after the conversion. The conversion process is designed to optimize the generator for natural gas or propane use.