Expert Guide: Mixing Hair Color and Bleach for Stunning Results
Table of Contents
- Introduction
- The Importance of Mixing Lightener and Permanent Hair Color
- Choosing the Right Products
- Understanding Ratios
- 4.1 One to Two Ratio for Lightener
- 4.2 One to Three Ratio for Hair Color
- Selecting the Developer Volume
- 5.1 10 Volume
- 5.2 20 Volume
- 5.3 30 Volume
- 5.4 40 Volume
- Mixing Lightener
- 6.1 Using Pravana Pure Light Lightener
- 6.2 Alternative Lightener Options
- Mixing Hair Color
- 7.1 Understanding the Ratio
- 7.2 Using the Tablespoon Method
- Tips for Mixing
- 8.1 Consistency
- 8.2 Adjusting the Thickness or Thinness
- Applying the Mixture
- Conclusion
Mixing Lightener and Permanent Hair Color: A Step-by-Step Guide
Introduction
Welcome back, everyone! Today, I'm going to guide you through the process of correctly mixing lightener and permanent hair color at home. Whether you're using professional products or opting for alternatives, this step-by-step guide will ensure you achieve desirable results. So, let's dive in!
The Importance of Mixing Lightener and Permanent Hair Color
Mixing lightener and permanent hair color is essential for achieving your desired hair transformation. Lightener, also known as bleach, helps lighten the hair, while hair color adds pigment and depth. Properly mixing these products ensures that they activate and work together effectively, providing you with beautiful and long-lasting results.
Choosing the Right Products
When it comes to selecting lightener and hair color, you have a range of options. While it's recommended to use name brand or professional products for optimal outcomes, you can also find suitable alternatives at beauty supply stores like Sally's. The key is to read the directions and choose products that align with your hair goals.
Understanding Ratios
When mixing lightener and hair color, it's crucial to follow the correct ratios specified by the manufacturers. This ensures the right balance and effectiveness of the products.
4.1 One to Two Ratio for Lightener
In most cases, lighteners have a one to two ratio, meaning for every ounce of lightener, you'll use two ounces of developer. However, it's essential to read the specific product's directions as ratios may vary.
4.2 One to Three Ratio for Hair Color
On the other hand, hair color typically follows a one to one ratio, where one tablespoon of hair color is mixed with an equal amount of developer. Again, always refer to the manufacturer's instructions for accurate measurements.
Selecting the Developer Volume
The developer volume determines the level of lift and depositing power. Here's a breakdown of the different developer volumes and their purposes:
5.1 10 Volume
Use 10 volume developer when you only want to deposit color without lifting the hair. It's ideal for darkening the hair or adding vibrant shades.
5.2 20 Volume
For covering gray hair or achieving a slight lift while depositing color, opt for 20 volume developer. It opens the cuticle of the hair strand, allowing the color to penetrate effectively.
5.3 30 Volume
If you require more lift, 30 volume developer is suitable. However, exercise caution as this volume can be damaging to the hair if not used correctly.
5.4 40 Volume
Avoid using 40 volume developer unless you have extensive experience and knowledge in hair coloring. This volume can cause severe damage and chemical burns.
Mixing Lightener
6.1 Using Pravana Pure Light Lightener
Today, we'll be using Pravana Pure Light Lightener as an example. However, you can use any lightener that suits your preference. Following the one to two ratio, measure one tablespoon of lightener and mix it with two tablespoons of 20 volume developer. Ensure the mixture is smooth and free of any lumps or inconsistencies.
6.2 Alternative Lightener Options
If you don't have access to professional products, don't worry! You can still achieve decent results using alternatives like Ion Brilliance Color Brilliance from Sally's Beauty Supply. Although the results may not be as exceptional, they are still satisfactory and budget-friendly.
Mixing Hair Color
To mix hair color, start by referring to the manufacturer's instructions for the correct ratio. Typically, hair color follows a one to one ratio. Measure one tablespoon of hair color and add one tablespoon of developer. Mix the two thoroughly until you achieve a creamy consistency.
Tips for Mixing
Proper mixing consistency is crucial for successful application and desired outcomes. Here are a few tips to help you achieve the perfect mixture:
8.1 Consistency
The mixture should neither be too foamy nor too liquidy. Aim for a thicker consistency that sticks to your brush without sliding off. This prevents leakage during application.
8.2 Adjusting the Thickness or Thinness
If your mixture is too thick, add a bit more developer to achieve the desired consistency. Conversely, if it's too thin, add a small amount of powdered lightener to thicken it up.
Applying the Mixture
Once your lightener and hair color are adequately mixed, you're ready to apply them to your hair. Follow proper application techniques to ensure even coverage and avoid overlapping of products.
Conclusion
Now that you've learned how to mix lightener and permanent hair color like a pro, you can save money and try exciting hair transformations at home. Remember to always follow the manufacturer's instructions and take necessary precautions for your hair's health. If you have any questions or need further assistance, feel free to ask in the comments section. Don't forget to like and subscribe for more hair care tips and beauty content!