Ultimate Review: Generac GP3300i Load Test & Start Up

Ultimate Review: Generac GP3300i Load Test & Start Up

Table of Contents

1. Introduction
2. Unboxing the Generac GP 3300
3. Adding Oil to the Generator
4. Inspecting the Spark Plug
5. Draining the Carburetor
6. Storing the Generator
7. Connecting the Generator to an RV
8. Using a Surge Protector
9. Sound Test of the Generator
10. Testing the Power Output
11. Running Appliances on the Generator
12. Conclusion

Introduction

Welcome back to the channel! In today's video, we will be testing the Generac GP 3300, a compact 3300-watt generator. We will go through the process of unboxing the generator, adding oil, inspecting the spark plug, and draining the carburetor. Then, we will show you how to connect the generator to an RV and perform a sound test. Finally, we will test the power output and see how well the generator can run various appliances. Let's get started!

Unboxing the Generac GP 3300

To begin, let's unbox the Generac GP 3300. The generator comes securely packaged, and we will carefully remove the top cover to access the internal components. Once the cover is removed, we can see the various parts of the generator, including the air filter and oil access point.

Adding Oil to the Generator

Before starting the generator, it is essential to add oil to ensure proper lubrication. The GP 3300 comes with its own oil, which is a 30-weight oil. Using the provided funnel, we can easily pour the oil into the designated oil access point. It is recommended to run the generator with this oil for about half an hour to an hour before switching to conventional oil, such as 10W-30.

Inspecting the Spark Plug

Next, let's inspect the spark plug of the generator. This can be accessed by pressing a thumb on the indicated spot and lifting the cover. The spark plug is crucial for the generator's ignition, and it is recommended to replace it with a high-quality spark plug if desired.

Draining the Carburetor

When storing the generator, it is important to drain the carburetor to prevent fuel from spoiling and causing issues. The Generac GP 3300 has a convenient carburetor drain screw that allows for easy fuel drainage. By opening the screw slightly, the fuel will start to drain from the bowl. After the fuel has drained completely, the screw can be closed securely.

Storing the Generator

To properly store the generator, it is recommended to remove the top cover and use a container to catch the fuel. Alternatively, you can run the generator until it runs out of fuel. By using the carburetor drain screw, you can easily drain the remaining fuel. This feature ensures that the carburetor remains clean and ready for future use.

Connecting the Generator to an RV

If you plan to use the generator with an RV, it is crucial to connect it properly. It is recommended to use a surge protector to protect your RV's electrical system. However, when using a surge protector with a generator, a bonding plug is necessary. The bonding plug should be connected to the 15 amp outlet on the generator to ensure proper grounding.

Using a Surge Protector

When using a surge protector or any other device with your generator, it is important to pay attention to the warning labels. Some surge protectors may display a caution message related to an open ground. By using a bonding plug as described earlier, you can eliminate this issue and ensure the safe operation of your generator.

Sound Test of the Generator

Before testing the generator's power output, let's perform a quick sound test. It is essential to place the generator at a distance of 23 feet from the testing area to simulate typical usage conditions. At this distance, the GP 3300 produces approximately 53.5 decibels of noise, which is relatively quiet for a generator of this size.

Testing the Power Output

Now, let's move on to testing the power output of the generator. The GP 3300 features a pure sine wave, which provides clean power and makes it suitable for powering various appliances. During the test, we will check the power output when running different appliances, such as refrigerators, laptops, and microwaves.

Running Appliances on the Generator

The GP 3300 proves to be capable of powering various appliances without any issues. It can easily handle the power requirements of refrigerators, laptops, and even induction stoves. The generator's clean power output ensures that sensitive electronics are not at risk of being damaged. Additionally, we tested running an air conditioner and a refrigerator simultaneously, and the generator handled the load without any significant voltage drop.

Conclusion

In conclusion, the Generac GP 3300 is a compact and reliable generator that performs well in various situations. Its easy-to-use features, such as the oil access point and carburetor drain screw, make maintenance a breeze. The generator's quiet operation and pure sine wave power output make it suitable for a wide range of applications. Whether you need backup power for your RV or want a reliable generator for camping trips, the GP 3300 is a great choice.

Highlights

• The Generac GP 3300 is a compact 3300-watt generator with a surge wattage of 3300 and a running wattage of 2500.
• Adding oil and performing maintenance on the GP 3300 is easy, thanks to the accessible oil access point and carburetor drain screw.
• The generator's pure sine wave power output ensures clean and reliable power for various appliances, including refrigerators, laptops, and microwaves.
• The GP 3300 can handle the power requirements of an air conditioner and a refrigerator simultaneously without significant voltage drop.
• The generator operates quietly, making it suitable for camping trips and RV use.

FAQ

Q: Can I use the Generac GP 3300 to power my RV? A: Yes, the GP 3300 is suitable for powering RVs and comes with features like a 15 amp outlet for easy connection.

Q: Does the generator come with its own oil? A: Yes, the Generac GP 3300 comes with its own 30-weight oil, which is suitable for initial use.

Q: Is the GP 3300 loud when running? A: No, the GP 3300 operates at a relatively quiet noise level, making it suitable for various environments.

Q: Can the generator run sensitive electronics? A: Yes, the GP 3300 produces clean power with a pure sine wave, making it safe to use with sensitive electronics.

Q: What is the maximum power output of the GP 3300? A: The GP 3300 has a surge wattage of 3300 and a running wattage of 2500.