Unboxing the GenTent 10K Storm Bracer

Table of Contents

1. Introduction
2. Unboxing the Gen 10 Inverter Generator Cover
3. Installing the Corner Braces
4. Attaching the Ratchet Strap
5. Mounting the Rods
6. Putting on the Gen Ten Cover
7. Widening the Stance
8. Adding the Control Panel Cover
9. Ensuring Full Coverage
10. Conclusion

Unboxing the Gen 10 Inverter Generator Cover

Finally, the long-awaited Gen 10 Inverter Generator Cover has arrived. This cover is specifically designed to fit the Predator 3500 Inverter Generator, which is a popular choice for van lifers like Sam and me. In this article, we will take a look at how to assemble and install the Gen 10 cover, and I'll share my thoughts and review on its performance.

When you open the box, you'll find four stakes that will be used to create the dome of the tent that goes over your generator. The canopy itself feels heavy-duty and durable, giving a good first impression. Additionally, the box includes all the necessary hardware, clips, an instruction manual, and warranty information. You can also purchase additional accessories, such as a full wrap for extra protection or a clear apron to cover other electronics while still being able to view important indicators like the gas gauge and electrical output.

Installing the Corner Braces

To begin the installation process, you'll need to grab one of the corner braces and two of the mounting brackets. The corner braces should be mounted onto the frame of the generator, ensuring that the holes are positioned at the bottom. After securing all four corner braces, it's time to attach the ratchet strap. Unfold the strap and feed it through the corners of the corner mounts, making sure it is properly aligned and smooth. Once the strap has been fed through all four corners, tighten it to ensure a secure fit around the generator.

Mounting the Rods

With the corner braces and ratchet strap in place, it's time to mount the rods that will give the cover its shape. Each corner of the cover has a slot where the rods will be inserted. Pick a hole on each corner that will provide the desired shape for the cover. For the Predator 3500, positioning the rods in the fourth hole out seems to work well. Ensure that the pins on the rods are pointing upwards to support the cover properly.

Putting on the Gen Ten Cover

Now that the corner braces and rods are installed, it's time to secure the Gen Ten cover onto the generator. Slip the cover onto the braces, making sure the holes in the bottom of the cover align with the pins on the rods. Click the cover into place on all four sides, ensuring a snug fit.

Widening the Stance

You may find that the cover is slightly loose when initially installed. To fix this, you can add additional clips to widen the stance of the cover. The kit includes enough clips to accommodate up to three on each side, although two are provided. Adding another clip on each side will widen the stance, resulting in a tighter fit of the cover around the generator.

Adding the Control Panel Cover

To protect the control panel side of your generator from the elements, an additional cover is included. Lift up the designated flap on the cover to reveal the Velcro strip. This strip runs the length of the cover on the front and side. Roll up the strip and secure it with the provided Velcro to keep the control panel area protected from water and wind.

Ensuring Full Coverage

After attaching the Gen Ten cover and the control panel cover, you will have full coverage of the front and sides of the generator. Ensure that the flap on the control panel cover is down to keep the Velcro strip protected. It's important not to block the exhaust or hinder airflow, so be mindful when placing the ratchet strap around the generator. Position it below the exhaust to allow for proper ventilation.

Conclusion

In conclusion, the Gen 10 Inverter Generator Cover is a durable and well-designed solution for protecting your Predator 3500 Inverter Generator. With its easy installation process and additional accessories available, such as a full wrap and control panel cover, it offers comprehensive coverage and protection. Now you can rest easy knowing that your generator is safeguarded from the elements during your van life adventures.

Highlights

• Specifically designed for the Predator 3500 Inverter Generator
• Heavy-duty canopy for increased durability
• Easy assembly and installation process
• Optional accessories available for added protection
• Full coverage of the generator, including the control panel
• Secure fit with corner braces and ratchet strap
• Ideal for van life enthusiasts
• Enhances the lifespan of the generator
• Allows for proper ventilation and exhaust functionality
• Reliable protection against wind, rain, and snow

FAQ

Q: Can the Gen 10 cover withstand extreme weather conditions? A: The Gen 10 cover is designed to withstand various weather conditions, including rain, wind, and snow. However, it is recommended to purchase the additional full wrap for enhanced protection during extreme weather events.

Q: Can the cover be used with other generator models besides the Predator 3500? A: While the Gen 10 cover is specifically designed for the Predator 3500 Inverter Generator, it may be compatible with other generator models of similar dimensions. However, it is recommended to double-check the measurements and specifications before purchasing.

Q: Does the installation process require any special tools? A: No, the installation of the Gen 10 cover does not require any special tools. All the necessary hardware and instructions are provided in the package.

Q: Can the control panel cover interfere with the operation of the generator? A: No, the control panel cover is designed to protect the control panel area from water and wind without obstructing its functionality. The flap can be easily opened to access the control panel when needed.

Q: Is it necessary to remove the cover when using the generator? A: No, the Gen 10 cover is designed to allow for the operation of the generator while it is still covered. However, it is recommended to keep the exhaust area clear for proper ventilation and to avoid blocking any airflow.